RK356X Debian/Ubuntu 系统安装Docker

本文基于IDO-SBC3528主板演示Debian/Ubuntu 系统任何安装Docker，方法适用于RK3568全系列产品。 

IDO-SBC3528-V1采用RK3568四核64位开发的智能主板，可作为RK3568开发评估板，支持8G大内存；支持PCIE2.0接口，可扩展大容量固态硬盘；支持双千兆以太网口；支持双频WiFi、蓝牙4.2以上，可扩展4G/5G网络通讯功能；具有丰富的视频输出接口（HDMI2.0/eDP1.3/MIPI1.2/LVDS) ；工业互联接口（RS232/RS485、CAN）。

 支持Android11/Debian10/Ubuntu20/Buildroot/麒麟OS/开源鸿蒙等多种操作系统。

使用方法参考如下：

- CONFIG_SECURITY_APPARMOR: missing

安装Docker

主板上执行以下命令安装Docker：

linaro@linaro-alip:~$ docker -v
Docker version 24.0.2, build cb74dfc
linaro@linaro-alip:~$

安装过程需要花费大约10分钟

安装完成后查看Docker版本：

linaro@linaro-alip:~$ docker -v
Docker version 24.0.2, build cb74dfc
linaro@linaro-alip:~$

验证

linaro@linaro-alip:~$ sudo docker run hello-world
Unable to find image 'hello-world:latest' locally
latest: Pulling from library/hello-world
70f5ac315c5a: Pull complete
Digest: sha256:a13ec89cdf897b3e551bd9f89d499db6ff3a7f44c5b9eb8bca40da20eb4ea1fa
Status: Downloaded newer image for hello-world:latest
[ 1228.015617] docker0: port 1(veth9b45dd3) entered blocking state
[ 1228.015735] docker0: port 1(veth9b45dd3) entered disabled state
[ 1228.017169] device veth9b45dd3 entered promiscuous mode
[ 1228.027619] IPv6: ADDRCONF(NETDEV_UP): veth9b45dd3: link is not ready
[ 1228.343879] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation
[ 1228.596774] eth0: renamed from vethc46e61e
[ 1228.611961] IPv6: ADDRCONF(NETDEV_CHANGE): veth9b45dd3: link becomes ready
[ 1228.612131] docker0: port 1(veth9b45dd3) entered blocking state
[ 1228.612147] docker0: port 1(veth9b45dd3) entered forwarding state
[ 1228.612346] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
 
Hello from Docker!
This message shows that your installation appears to be working correctly.
 
To generate this message, Docker took the following steps:
 1. The Docker client contacted the Docker daemon.
 2. The Docker daemon pulled the "hello-world" image from the Docker Hub.
    (arm64v8)
 3. The Docker daemon created a new container from that image which runs the
    executable that produces the output you are currently reading.
 4. The Docker daemon streamed that output to the Docker client, which sent it
    to your terminal.
 
To try something more ambitious, you can run an Ubuntu container with:
 $ docker run -it ubuntu bash
 
Share images, automate workflows, and more with a free Docker ID:
 https://hub.docker.com/
 
For more examples and ideas, visit:
 https://docs.docker.com/get-starte

————————————————
版权声明：本文为CSDN博主「Industio_触觉智能」的原创文章，遵循CC 4.0 BY-SA版权协议，转载请附上原文出处链接及本声明。
原文链接：https://blog.csdn.net/Industio_CSDN/article/details/131475955